Error E4 in AEG kitchen plate

html

Error E4 in AEG kitchen plate

What is the E4 error?

Error: E4

Description: This error occurs because the container has evaporated all the liquid inside, which automatically activates the overheating protection and causes the hob to disconnect.

Causes of the E4 error

The main cause is that the container has dried out completely during cooking, triggering the safety mechanism to prevent damage due to overheating.

How to delete the E4 error

1. Turn off your kitchen plate immediately.
2. Carefully remove the hot container from the hob.
3. Wait at least half a minute before turning the kitchen focus back on.
4. Let the container cool down completely.
5. Check that the container is suitable for induction cooking. If it is not, residual heat may continue to cause issues.
6. If the error persists despite following these steps, unplug the hob and do not use it until the problem is resolved by a technical specialist.

Additional tips

The hob is one of the best ways to cook food evenly. However, when it malfunctions, it can become a major inconvenience. If you experience any error with your AEG kitchen plate and cannot resolve it following the instructions above, we strongly recommend contacting an authorized technical or specialist service. They can diagnose and solve the problem efficiently and safely.

Other error codes in AEG kitchen plates

For information on other error codes, please refer to our full list of AEG kitchen plate errors below.

[pt_view id=”74b76b4vxl” cat=”kitchen-plate,aeg-en” operator=”AND”]