Error E25 in Siemens washing machine

Error E25 in Siemens washing machine

How to eliminate the E25 error in Siemens washing machine?

Error: E25

Description: Water supply problem.

Causes

• Tap with bad or insufficient water flow.
• Entrance hose in poor condition, bent, twisted, or obstructed.
• Obstructed or clogged water intake filters.
• Electrovalve without current or damaged.
• Fugging or blockage in the tube that connects the Aquastop hose.

Solutions

• Check that the tap is open and not clogged.
• Ensure water pressure is between 2 and 4 bars:
  • If pressure is less than 2 bars, water flow will be insufficient.
  • If pressure is greater than 4 bars, excessive water flow could cause leaks.
• Verify that the water intake filters are clean and free of obstructions. Clean them if necessary.
• Inspect the entrance hose and Aquastop hose to ensure they are not bent, twisted, or clogged.
• Check the electrovalve for proper operation and current supply; replace if damaged.

Additional Tips

This error occurs when water does not enter the washing machine properly through the hose. The most common causes are low water pressure, clogged intake filters, or a blocked hose.

To resolve the error:

1. Verify the water pressure is within the recommended range (2 to 4 bars).
2. Clean the water intake filters regularly to ensure proper water flow.
3. Inspect and clear any blockages in the hoses.
4. If the problem persists, contact Siemens technical or specialist repair service for a professional diagnosis and repair.

Other error codes in Siemens washing machine

[pt_view id=”74b76b4vxl” cat=”washing-machine,siemens-en” operator=”AND”]