Dishwasher
Errors or Error Codes for Samsung Dishwashers

When your Samsung dishwasher starts acting up, it can be frustrating not knowing what’s going on. Luckily, most modern dishwashers, including those from Samsung, come equipped with self-diagnostic systems that display error codes to help you identify the problem. But what does each code mean? Here at codigodeerror.com, we want to make your life easier. That’s why we’ve prepared a comprehensive table with the most common error codes you might encounter with your Samsung dishwasher, along with their possible causes and solutions.
Before we dive into the table, let’s clarify some concepts that might be new to you:
- Drain pump: Essential for removing dirty water from the dishwasher. If it fails, water won’t drain properly.
- Filter: Captures food remnants and other debris. A clogged filter can prevent the dishwasher from draining correctly.
- Supply/drain hose: Pipes that carry water to and from the dishwasher. Issues here can cause leaks or drainage problems.
- Pressure switch: A switch that measures water pressure. If it fails, it can cause issues in the washing cycle.
- Control panel: The “brain” of your dishwasher, where you select cycles and options. A failure here can mean the dishwasher won’t operate at all.
With these concepts in mind, here’s the error code table that will help you diagnose and, in many cases, solve problems with your Samsung dishwasher:
| Error | Description | Cause | Solution |
|---|---|---|---|
| Drain pump failure | There are fragments of broken dishes or other debris trapped in the pump impeller. | Unscrew the pump support and remove the foreign substances or contact Samsung Support Center. | |
| Drain pump failure | The seals are worn out and leak during the washing process. | Contact the Samsung Support Center. | |
| Clogged filter | Filter clogged by food remains. | Clean the filter. (How to clean the filter). | |
| Drum leak | Defective drum. | Contact the Samsung Support Center. | |
| Hose leak | Water supply hose loose. Hole in the water supply hose or in the drain hose. | Straighten the supply hose. Use insulating tape temporarily. If it doesn’t work, contact the Samsung Support Center. | |
| Sensor malfunction | Malfunction of the pressure switch (electrical switch activated by fluid pressure) | Contact the Samsung Support Center. | |
| Drain hose | Hose frozen or covered in ice. The hose is bent. The hose is clogged. | Remove the hose, immerse it in hot water and melt the ice inside. Make sure not to break the hose. Straighten the hose. Remove the hose and eliminate any foreign substances. | |
| Water supply hose | Hose frozen or covered in ice. The hose is bent. | Remove the hose, immerse it in hot water and melt the ice inside. Be careful not to break it. Straighten the hose. | |
| Dishwasher level | Dishwasher tilted forward. | Level the dishwasher by adjusting the three or four leveling legs. (See the image below). | |
| Control panel issue | Failure in the control panel. | Contact the Samsung Support Center. | |
| Dispenser issue | Using hand wash detergent instead of dishwasher detergent or using too much detergent. The dispenser has been filled with an excessive amount of rinse aid. Damaged dispenser. | Use dishwasher detergent in small amounts. Remove the rinse aid with a damp towel. Contact the Samsung Support Center to replace the dispenser. | |
| Control panel issue | Failure in the control panel. | Contact the Samsung Support Center. | |
| Water supply valve | Water supply valve closed. Water supply valve frozen or covered in ice. Defective water supply valve. Water supply valve filter clogged by foreign substances. | Open the valve. Thaw the frozen valve by soaking a towel in 50~60℃ hot water and wrapping it around the valve. (Be careful and avoid burns when coming into contact with hot water). Contact the Samsung Support Center to replace the valve. Clean the valve and remove foreign substances. |
Our advice
Before calling technical service, check this table to see if you can identify and solve the problem yourself. Many times, the issues are minor and can be resolved without the need for a technician. However, if you feel uncomfortable performing any of the suggested solutions or the problem persists, do not hesitate to contact the Samsung Support Center for professional help.
Error codes in Samsung Dishwasher
[pt_view id=”74b76b4vxl” cat=”dishwasher,samsung-en” operator=”AND”]
Este artículo contiene enlaces de afiliado: si compras a través de ellos, se genera una pequeña comisión sin coste adicional para ti. Más información.
Balay6 days agoE05-32 error on a Balay oven: causes and safe solution
- Washing machine6 days ago
Hotpoint washing machine F09 error: what it means and what to do
- Balay5 days ago
E09 error in Balay dishwasher: causes and safe solution
Dishwasher5 days agoE15 error on Balay dishwasher: do not tilt it
Dishwasher5 days agoE09 error in Balay dishwashers: causes and safe solution
Balay5 days agoBalay washing machine E12 error: causes and safe solution
Dishwasher4 days agoBalay dishwasher E15 error: warranty coverage and solution
Dishwasher5 days agoE11 error in Balay dishwashers: causes and solutions
Balay4 days agoBalay washing machine E2 error: causes and safe solutions
Balay5 days agoE09 error in Balay dishwasher 3VS503IA: causes and fix
Dishwasher4 days agoBalay dishwasher E16 error: causes and safe solution
- Balay6 days ago
E0 error on a Balay induction hob: causes and fixes
















