Error D14 in Fagor Dishwasher

How to eliminate D14 Error Code on Fagor Dishwasher

• Error: D14
• Description: Water filling failure.
• Cause: Issues with the washing pump, pipes, or filters.
• Solution: Check and clean components.

Encountering the D14 error code on your Fagor dishwasher can be a moment of concern. However, don’t panic. We’ll explain what this error means and how you can troubleshoot it yourself without immediately calling a technician.

What Does Code D14 Mean?

The D14 code indicates that your Fagor dishwasher has a problem related to water filling. This could be due to the washing pump not functioning correctly or the electronic board not detecting the appropriate water level.

Common Causes of the D14 Error

• Closed or partially open water tap.
• Bent, twisted, or obstructed water inlet hose.
• Improperly positioned drain hose or plumbing issues.
• Faulty washing pump or obstructions.
• Water leaks in electrical components.
• Electrical wiring problems.
• Clogged dishwasher filters.
• Damaged electronic board.

Step-by-Step Solutions

1. Check the Water Inlet Hose
   Ensure the tap is fully open and the hose isn’t bent or twisted. Check the inlet filters and solenoid valve for blockages and clean if necessary.
2. Verify the Drain Hose
   The drain hose should be at least 60 cm off the ground and not inserted more than 15 cm into the drain pipe. Make sure it’s properly positioned.
3. Filter Cleaning
   It’s vital to clean the filters after each washing cycle. These are located inside your dishwasher and their cleaning is simple yet crucial for proper operation.
4. Clean the Water Level Detection Well
   Beneath the filters and the lower spray arm, you’ll find the detection well. Disassemble necessary components and clean the well to ensure accurate water level detection.
5. Check the Washing Pump
   If the problem persists after cleaning the washing pump and verifying that the impeller spins freely, you may need to replace the washing pump.

Additional Tips

• Power Disconnection: Before any intervention, make sure to disconnect the dishwasher from the power source to avoid the risk of electric shock.
• User Manual: Refer to your Fagor dishwasher manual for specific information on accessing and cleaning the mentioned components.

If after following these steps the D14 code persists, it could indicate a more serious issue such as a damaged electronic board, in which case we recommend contacting a specialized technical service.

Remember, prevention is key. Keep the filters clean and ensure the pipes are in good condition to avoid future errors. We hope this article has helped you solve the problem with your Fagor dishwasher!

Other error codes in Fagor Dishwasher

[pt_view id=”74b76b4vxl” cat=”dishwasher,fagor-en” operator=”AND”]