Error The washing machine does not drain or centrifuga in Midea washing machine

Error: “Error code, does not drain or spin”
Description: The washing machine does not remove water or perform the spin cycle.
Cause: It could be due to hose blockages, an issue with the lid or lid switch, loose or broken belts, or a faulty drain pump.
Solution: Check and correct possible obstructions, ensure the lid closes properly, replace belts if necessary, and check the drain pump’s operation.

Step-by-Step Solution

Check Drain Hoses

1. Inspect the Hose: Look for twists or obstructions that may hinder drainage.
2. Straighten the Hose: If there are bends, try straightening them.
3. Clear Obstructions: Use a screwdriver to remove any blockages or run water through to clean.
4. Reinstall the Hose: Once cleaned, place it back in position.

Verify the Lid and its Switch

1. Close the Lid: Ensure it closes completely.
2. Listen for the Click: When closing the lid, you should hear a switch click.
3. Replace the Switch if Needed: If there’s no click, you may need to replace the lid switch.

Check Belts

1. Access the Back Panel: Disconnect the washer and remove the panel.
2. Inspect Belts: Use a flashlight to check their condition.
3. Replace Belts if Necessary: If damaged, replace them.

Evaluate the Drain Pump

1. Inspect the Pump: With the back panel removed, use a voltmeter to check if the pump is receiving power.
2. Listen to the Pump: If the pump is working but water isn’t draining, consider cleaning or replacing it.

Call a Technician if Needed

If, after following these steps, your Midea washing machine still doesn’t drain or spin, it’s time to contact a professional technician.

Tips for Washer Care

• Regular Maintenance: Clean hoses and your washer’s filter regularly.
• Proper Detergent Use: Avoid excess foam by using the recommended amount of detergent.
• Load Distribution: Ensure clothes are evenly distributed in the drum.

More tips

If you fail to resolve your washing washer’s error, we recommend that you contact the technical or specialist service in case the guarantee. Be sure to handle the model number and standard for your washing machine to facilitate the process to the technician.

Other error codes in Midea washing machine

[pt_view id=”74b76b4vxl” cat=”washing-machine,midea-en” operator=”AND”]