Error E95 in Electrolux washing machine

Error E95 in Electrolux washing machine

How to eliminate Error: E95 in Electrolux washing machine?

Description

Configuration and communication problem between electronic control boards, volatile memory (EEPROM) and the main processor. The fault indicates failure in the exchange of data or in the programming of the control electronics.

Possible causes

• Unstable or missing power supply to the control board.
• Faulty or corrupt EEPROM (volatile memory) or its programming.
• Damaged wiring or poor connections between the EEPROM and the processor.
• Programming failure or malfunction of the main control board.

Step-by-step solutions

1. Power cycle: Disconnect the appliance from mains for at least 1–2 minutes, then reconnect. This can reset temporary faults.
2. Run diagnostics and clear codes: Enter the appliance diagnostic/service mode, perform a system test and delete stored error codes. Verify whether the E95 returns.
3. Check power to the control board: Ensure the control board receives stable voltage. Inspect fuses and connectors for signs of burn or damage.
4. Inspect and reseat connections: Disconnect and reconnect cable plugs to the control board, especially those linking the EEPROM and processor. Check wiring for breaks or corrosion.
5. Verify EEPROM integrity and circuit: Examine the EEPROM and the circuit path to the processor. If the EEPROM is damaged or its data is corrupt, reprogramming or replacement may be required.
6. If programming failure persists: Consider reprogramming or replacing the main control board. This typically requires specialized tools and knowledge.

When to call technical service

If the error persists after the steps above, or if you are not confident performing electronic checks, contact Electrolux technical service or a qualified technician. They can perform an accurate diagnosis, reprogram or replace components and ensure a safe, definitive repair.

More tips

• Always disconnect the appliance from mains power before inspecting internal components.
• Note the model and serial number before contacting support; technicians may need this information for diagnostics or parts.
• Take photos of connectors and wiring before disconnecting to ensure correct reassembly.

Other error codes in Electrolux washing machine

For information on other Electrolux washing machine error codes, consult the related error code list for your model or the appliance manual to identify and resolve further faults.