Connect with us

Electrolux

Error E5a in Electrolux washing machine

Published

on

Error E5A in Electrolux washing machine

Description

Error: E5A

What it means: The cooling radiator (electronic dissipator) is overheating — recorded above 88 °C. The same code is also reported on some Electrolux dryers as an excessive heating problem of the electronic plate dissipator.

Possible causes

  • Failure or poor dissipation of the cooling radiator (dissipator).
  • Faulty or damaged electronic control board (electronic box).
  • Burnt components, damaged tracks or loose connectors on the electronic board.
  • Blocked ventilation or other conditions that prevent proper cooling.

Recommended solutions

Follow these steps in order to troubleshoot and resolve the E5A error:

  1. Power reset: Disconnect the appliance from the electricity supply for 10–15 minutes to allow the electronics and dissipator to cool. Then reconnect and check if the error clears.
  2. Visual inspection: With the appliance unplugged and after ensuring it is safe to access, inspect the electronic board and dissipator for burned components, damaged tracks, bulging components or loose connectors.
  3. Check cooling/dissipation: Verify that the dissipator and any ventilation areas are not blocked and that any cooling fan (if present) can operate freely.
  4. Repair or replace: If the board shows damage or the error persists after the reset and inspection, the usual corrective action is to replace the electronic control box (control board).

When to contact technical service

If you cannot identify visible faults, the problem recurs after resetting, or you are not comfortable performing inspections or replacing electronic parts, contact Electrolux technical service or a qualified appliance technician. They can perform diagnostic tests, confirm whether the control board or other components must be replaced, and carry out safe repairs.

More tips

  • Always disconnect the appliance from mains power before inspecting internal components.
  • Document any visible damage or error behavior to share with the technician.

Other error codes in Electrolux washing machine

For information on other Electrolux error codes, consult the manufacturer documentation or the troubleshooting section of the site.

Este artículo contiene enlaces de afiliado: si compras a través de ellos, se genera una pequeña comisión sin coste adicional para ti. Más información.

Lo más leído