Error E27 in Balay washing machine

Error E27 in Balay washing machine

How to eliminate the E27 error in Balay washing machine?

Error: E27

Description: Water supply problem.

Causes

• Tap with bad water flow or closed tap.
• Water pressure too low or too high (must be between 2 and 4 bars).
• Entrance hose in poor condition, bent, twisted, or obstructed.
• Clogged water intake filters.
• Electrovalve without current or damaged.
• Fugging or obstruction in the tube that connects the inlet (Aquastop hose).

Solutions

• Check that the tap is open and water flows properly.
• Ensure water pressure is between 2 and 4 bars:
  • If pressure is less than 2 bars, water flow is insufficient.
  • If pressure is greater than 4 bars, water flow may be excessive and cause leaks.
• Check and clean the water intake filters to remove any clogs.
• Inspect the entrance hose and Aquastop hose for bends, twists, or obstructions and clear if necessary.
• Verify that the electrovalve is receiving current and is not damaged.

Additional Tips

If you fail to solve the E27 error in your Balay washing machine after checking the above points, it is best to contact the corresponding technical or specialist service. These professionals can correctly diagnose the problem and provide the best solutions to repair your washing machine.

Other error codes in Balay washing machine

[pt_view id=”74b76b4vxl” cat=”washing-machine,balay-en” operator=”AND”]