Error E25 in Balay washing machine

Error E25 in Balay washing machine

Description

Error: E25

Description: Water supply problem.

Causes

• Tap with bad or insufficient water flow.
• Water pressure too low or too high (outside 2 to 4 bars range).
• Entrance hose in poor condition, bent, twisted, or obstructed.
• Clogged water intake filters.
• Obstruction in the Aquastop hose or the tube connecting the washing machine.
• Electrovalve without current or damaged.

Solutions

To eliminate the E25 error on your Balay washing machine, follow these steps:

1. Check that the water tap is fully open and not clogged.
2. Verify that the water pressure is within the recommended range of 2 to 4 bars.
   • If the pressure is less than 2 bars, the water flow will be insufficient.
   • If the pressure is greater than 4 bars, the water flow may be excessive and could cause leaks.
3. Inspect the entrance hose to ensure it is not bent, twisted, or damaged.
4. Clean the water intake filters to remove any blockages or debris.
5. Check the Aquastop hose and any connecting tubes for obstructions.
6. Verify that the electrovalve is receiving current and is functioning properly; repair or replace if damaged.

Additional Tips

This error typically occurs when water does not enter the washing machine properly through the hose. The most common causes are low water pressure, clogged water intake filters, or hose blockages. Ensuring proper water flow and pressure is essential to avoid this error.

If you fail to solve your Balay washing machine error E25 after these checks, we recommend contacting the technical or specialist service. They can help diagnose the problem and, if necessary, repair or replace parts of the washing machine.

Other error codes in Balay washing machine

[pt_view id=”74b76b4vxl” cat=”washing-machine,balay-en” operator=”AND”]