Error F or F1 error in AEG kitchen plate

Error F or F1 error in AEG kitchen plate

What does the F or F1 error mean?

The F or F1 error appears when there is no suitable container on the induction cooking zone. This means the zone is either empty or the container placed is not suitable for induction cooking. The power is very low or the plate does not detect the container properly.

This can happen if the container is too small or made of a non-ferromagnetic material that induction plates do not recognize.

Causes

• Using a container that is not suitable for induction cooking due to material or size.
• Placing the container on a cooking zone that does not match its size.
• Wet surface on the induction plate.
• Turning on the plate with an empty container on top.
• Occasionally, connection problems within the plate.

How to fix the F or F1 error

1. Use a container suitable for induction cooking—preferably ferromagnetic materials like cast iron or special induction-compatible cookware.
2. Place the container on a cooking zone that corresponds to its size.
3. Ensure the surface of the induction plate is clean and dry.
4. Do not turn on the plate with an empty container or no container at all on the cooking zone.
5. If the problem persists, check for possible connection issues or internal faults.

Additional tips

If you have tried all the above solutions and the error still appears, it is recommended to contact the nearest authorized technical or specialist service. They can diagnose the problem accurately and provide the most appropriate solution.

Other error codes in AEG kitchen plate

For more information about other error codes on AEG kitchen plates, please refer to our dedicated section below.

[pt_view id=”74b76b4vxl” cat=”kitchen-plate,aeg-en” operator=”AND”]