Error H20 in Indesit drying machine

How to eliminate the H20 error in Indesit dryer?

• Error: H20
• Description: Water supply problem
• Cause: Tap with bad water flow.
  Entrance hose in poor condition.
  Obstructed filter.
  Electrovalve without current or damaged.
  Fugging in the tube that connects the prisoner.
• Solution: Water pressure must be between 2 and 4 bars. If the pressure is less than 2 bars, the water flow will be insufficient. If the pressure is greater than 4 bars, the water flow will be excessive and a leak could occur.
  
  The water intake filters must be clean and not obstructed. If the filters are clogged, the water flow will be insufficient.
  
  The Aquastop hose must be free of obstructions. If the hose is obstructed, the water flow will be insufficient.

More tips

It is a problem that occurs when the water does not enter the washing machine through the hose. The most common causes of error are: water pressure is too low, water intake filters are clogged or hose is clogged.
To solve the error, you must first check that the water pressure is between 2 and 4 bars. If the pressure is less than 2 bars, the water flow will be insufficient. If the pressure is greater than 4 bars, the water flow will be excessive and a leak could occur.
If the water intake filters are clogged, the water flow will be insufficient. Therefore, it is necessary to clean the water intake filters to the supply.
If the hose is obstructed, the water flow will be insufficient. Therefore, it is necessary to verify that the hose is free of obstructions.

Other error codes in Indesit drying machine

[pt_view id=”74b76b4vxl” cat=”drying-machine,indesit-en” operator=”AND”]