Error F5 in Fagor Dishwasher

How to eliminate F5 Error Code on Fagor Dishwasher

• Error: F5 or F05
• Description: Overheating alarm
• Cause: Overheating in some of the parts or elements of the dishwasher
• Solution: Check and repair the affected parts or elements

If your Fagor dishwasher displays the F05 error code, it is important to know that this is due to an overheating alarm.

It is important to note that repairing a dishwasher requires certain technical knowledge, so it is recommended that the inspection and repair be carried out by a specialized technician.

The following is a guide on how to solve the F05 error on Fagor dishwasher:

Step 1: Disassemble side panels of the dishwasher

The first thing to do is to remove the side panels of the dishwasher to access the parts and elements that may be affected. To do this, the dishwasher must be disconnected from the power source and the screws holding the side panels must be removed.

Step 2: Look for or locate the heating element

Once you have access to the parts and elements of the dishwasher, look for or locate the heating element. This is the part responsible for heating the water used to wash the dishes. If this part is overheated, it may be the cause of the F05 error.

Step 3: Check sensor or switch on the same heating element

Once the heating element is located, check the sensor or switch located on the same part. This sensor sends a signal to the electronic board of the dishwasher to indicate when it should heat the water. If this sensor is failing, it could be the cause of the F05 error.

Step 4: Verify NTC sensor

Another part that may be affected is the NTC sensor. This part is responsible for measuring the temperature of the water inside the dishwasher. If the NTC sensor is not functioning properly, it could be indicating a temperature that is too high, which would generate the F05 error.

Step 5: Check voltage supply

It is important to verify that the voltage supply to the dishwasher is appropriate. If the electric voltage is unstable or inadequate, it could generate overheating in the parts and elements of the dishwasher, which would generate the F05 error.

Step 6: Check electronic board

Finally, check the electronic board of the dishwasher. This is the part responsible for controlling the operation of all the parts of the dishwasher. If the electronic board is failing, it could generate the F05 error.

Also, check that the electronic board controlling the heating element is working correctly and receiving the necessary voltage supply. If the problem persists, inspect the electronic board in detail to verify that all components are functioning correctly. If there is a suspicion that there is a problem with the relay that feeds the heating element, check that the relay contacts are not stuck, as this could cause the heating element to always be on and overheating the water. Regarding the thermostats, if one of them is suspected of not functioning, it can be manually reset, but if this is not possible, it must be replaced.

Other error codes in Fagor Dishwasher

[pt_view id=”74b76b4vxl” cat=”dishwasher,fagor-en” operator=”AND”]