Connect with us
The heating fault usually points to the heating element, the probe, or the circuit board. Clear clues to diagnose it.
The washing machine is not reaching the expected temperature: these are the most likely causes and what to check first.
The temperature rises too much due to a control failure. Probe, heating element, relay, and circuit board are the key parts.
The F29 fault points to the steam generator and requires checking the connections, resistance, and thermostats carefully.
The fault points to the air temperature sensor and the heating circuit. That is how it is interpreted and checked methodically.
The door does not lock and the cycle is interrupted. This is how fault F32 is identified and what to check before repairing.
The door does not release the latch and the cycle remains blocked. These are the usual causes and the most useful initial check.
The door does not lock and the cycle stops: causes, checks, and signs to call a technician.
A fault in the buttons or in the board can take the Miele out of action. This is how it is identified and the repair is...
Fault F39 points to the electronics and usually requires a careful inspection of connections, the board, and programming.
The fault points to the temperature probe or its circuit. Here's how to interpret it and what to check before calling the technician.
The electronic board is usually behind this fault. Check connections, visible damage, and when it’s advisable to call a technician.