Connect with us
The machine does not take water and the cycle stops. These are the most common causes of the D01 alert and how to check them.
The Lynx washing machine stops because of a blocked filter: causes, signs, and practical inspection to restore drainage.
The warning usually indicates a problem with the drain: position, blockage, or incorrect installation.
The drum gets jammed and the washing machine stops. Here’s how to identify the fault, what to check, and when to ask for help.
The Lynx washing machine stops due to an incomplete closure. Here are the causes and the most effective solution.
The C9 alert usually indicates an open lid with the child lock activated. This is what you should check before calling technical service.
Excessive foam can block the cycle and trigger the warning. Adjusting the detergent and load usually resolves it.
Imbalance, poorly adjusted feet, or rubbing against furniture: this is how the warning is corrected without forcing the machine.
The E4 warning is usually linked to an imbalance or poor leveling of the equipment and requires a precise inspection.
The code indicates a fault in the charging detection and requires the equipment to be inspected using technical judgment.
The fault points to the water level sensor. Here’s how to interpret it, what to check, and when to ask for technical help.
The notice indicates a lid lock failure. Check the door, latch, and lock before requesting assistance.