Connect with us
Solve dryer faults faster with practical guides to error codes, common breakdowns and simple repair steps. Get clear help to identify what the warning means and act quickly. Use these articles to bring your drying machine back to life with less stress.
The code indicates a problem with the motor, the board, or the TRIAC, with clear clues to assess the fault.
The warning usually indicates a voltage drop below 175 V and may stop the cycle or block startup.
An internal communication failure can stop the cycle. These are the most likely causes and the basic checks.
The alarm usually indicates a heating fault or a sensor fault. These are the most likely causes and how it is diagnosed.
The E73 alert usually indicates a fault in the NTC sensor or its circuit, with shutdowns and irregular drying.
The alert points to a thermal reading failure. Sensor, wiring, and ventilation are the key clues to locate it.
Code E85 usually indicates a draining problem in the dryer, and it is advisable to check the pump, connections, and control board.
The E9C error points to the electronic board. Check what causes it and when it’s advisable to call the technician.
The warning cuts the cycle off due to an erroneous thermal reading. This distinguishes the probe, the wiring, or the board.
The dryer interrupts the cycle due to an out-of-range reading. These are the causes, the key check, and the correct diagnosis.
The ED2 warning indicates a thermal fault in the dryer, with the heating element and electronic control under suspicion.
The warning usually indicates excessive foam and an abnormal reading. Here’s how to interpret it and what to check without wasting time.