Connect with us
Error code 4C2 appears when the washing machine detects incoming water that is too hot. Here’s how to fix it and when it needs to be...
Error code 4E indicates a water inlet problem. Check hoses, water pressure, filters, and the detergent drawer.
The FC code usually indicates an electrical frequency problem and does not always require immediate repair.
The washing machine locks up due to an internal communication fault, and it is advisable to check the wiring, control board, and interface safely.
The fill alert usually points to water, hoses, filters, or drainage; here’s how to narrow it down without beating around the bush.
Error code E21 indicates a draining problem. Check the filter, pump, and hose before considering a more serious fault.
The E01 fault is usually related to the incoming water, the sensor, or the control board. Here its cause and the appropriate repair are explained.
The warning indicates a fault in the thermal sensor and may cut off heating. Here’s how to identify and fix it.
The TE warning usually indicates a temperature or sensor problem. These are its causes and how to identify it.
The AEG control board enters protection due to excessive temperature. What triggers the warning, how to cool it down, and when to check the equipment.
The AEG board shuts off for safety when it detects excessive heat. This is how the warning is interpreted and when it requires inspection.
The cooktop locks due to an electrical or installation anomaly. These are the real causes and the safe inspection that follows.