Connect with us
Steps to Resolve Error “E5” If your Midea washing machine displays the “E5” error code, it indicates an issue with the water level in the drum....
How to eliminate E4 error in washing machine? Error: E4 Description: Your washing machine is not level. It was the impact switch. Cause: Solution: Adjust the washing machine level,...
How to eliminate E3 error in washing machine? Error: E3 Description: Your washing machine is unbalanced more than three times during the centrifuged operation. Cause: Solution: The washing machine...
How to eliminate the error E2 in Midea washing machine? Error description The E2 error in Midea washing machines indicates that the lid is open or...
How to eliminate E1 error in Midea washing machine? The E1 Error on a Midea washing machine indicates issues with the water supply. This can be...
How to eliminate error when the washing machine has excessive vibrations or noises in measures? Error: When the washing machine has excessive vibrations or noise Description: When the...
reduce the amount of detergent.” Error: Condition abroad Description: Condition abroad Cause: Solution: Use a high efficiency detergent to reduce foam formation. See select a detergent on page 30.If...
How to eliminate the error C9 in Midea washing machine? Error: C9 Description: The lid has been open for more than 20 seconds with the safe function for...
How to eliminate the D07 error in LYNX washing machine? Error: D07 Description: The lid has not closed correctly. Cause: Solution: Check if the lid is closed and press...
How to eliminate the error D06 in LYNX washing machine? Error: D06 Description: The drum is blocked. Cause: Solution: Check if there is any garment More tips If you...
How to eliminate the D03 error in LYNX washing machine? Error: D03 Description: Check the position of the drain hose Cause: Solution: The connection should not be obstructed More...
How to eliminate the D02 error in LYNX washing machine? Error: D02 Description: The pump filter is obstructed. Cause: Solution: Clean the filter and press the “Start” key. Check...