Connect with us
The fault usually indicates an unbalanced drum. These are the most likely causes and how to check the washing machine.
What does this fault indicate, why does it appear, and how to check the probe, wiring, and compressor properly.
The warning usually indicates overheating in a specific area. This is how it is interpreted and when it is advisable to request a technical inspection.
The fill fault in Bosch usually points to water, filters, the valve, or a sensor, with clear clues to detect it.
The E2 code usually reveals a communication or sensor problem and requires checking the wiring, connections, and electronics.
The E10 warning usually indicates an isolated fault. These are the key checks to make before requesting assistance.
What triggers this alarm, how to inspect the installation, and when it is advisable to stop the equipment to avoid further damage.
The warning is usually related to the water inlet and several points of the installation.
The DC1 code usually indicates a fault in the main door lock and does not always require immediate repair.
The 3CP warning is usually related to the button motor and, many times, it is fixed with a reset and basic inspection.
The E27 warning is usually related to insufficient electrical voltage, and it is advisable to check the power supply before assuming an internal fault.
Door locking can stop the cycle. These are the most common causes and what to check before the technician arrives.