Connect with us
The F06 warning usually indicates a fault in the selector or in the electronics. This is how its origin is identified precisely.
The washing machine protects itself against excess water or foam. These are the most common causes and what to check.
The fault usually indicates a problem in the control electronics. Here’s how to interpret it and when it’s worth taking action.
The AEG panel shows F1 when the container is invalid, empty, or the detection fails.
The washing machine does not drain properly: the filter, pump, hose, and wiring are almost always where the fault lies.
The washing machine stops due to a drainage fault, a blocked pump, or damaged wiring. Here’s how to interpret and check it.
The door does not lock, the washing machine beeps and stops. This is what you should check before calling the technician.
The door doesn’t close, the cycle stops, and the washing machine won’t start. This is how the fault and its response are identified.
The water inlet fails due to pressure, hose, or filter. These checks clarify the source before the technician.
The warning indicates insufficient water filling. Faucet, pressure, filters, and hose account for almost all causes.
The dryer does not confirm the door closure and blocks the cycle. These are the causes and the most useful response.
Error code F18 indicates a draining fault. Check the filter, hose, and pump before requesting technical assistance.